Rimage AutoEverest AutoPrinter Guia do Utilizador

Rimage AutoPrinter™ User Guide This manual provides the information needed to operate the AutoPrinter and identify the parts. To setup and install

Identify the Parts of the AutoPrinter 110656_L 7 Identify the Parts of the AutoPrinter This section identifies the different parts of the AutoPrinte

Rimage AutoPrinter™ User Guide 8 110656_L 12BRear View AutoEverest II AutoPrism II AutoEverest III AutoPrism III * The serial cable is used on

Operate the AutoPrinter 110656_L 9 Operate the AutoPrinter This section provides the information needed to operate your Rimage AutoPrinter. 13BInsta

Rimage AutoPrinter™ User Guide 10 110656_L 15BLoad and Unload Discs You can load up to 100 discs per carousel bin. You may load discs in the bins be

Maintain the AutoPrinter 110656_L 11 Maintain the AutoPrinter Use the information in this section to keep your AutoPrinter in optimal operating cond

Rimage AutoPrinter™ User Guide 12 110656_L 4. Align the printer. a. Slowly slide the lift arm down until the disc just touches the print pad. b.

Maintain the AutoPrinter 110656_L 13 26BPrismPlus! Printer @ Required Tools: • Torx T25 screwdriver • 5/32″ Allen wrench 1. Power on the AutoPri

Rimage AutoPrinter™ User Guide 14 110656_L b. If the disc is not centered side-to-side on the print pad, adjust the alignment. i. Use the Torx T25

110656_L Corporate Headquarters: Rimage Corporation 7725 Washington Avenue South Minneapolis, MN 55439 USA 800-553-8312 (toll free US) Service: +1 95

110656_L Contents Introduction ... 1 Abou

Introduction 110656_L 1 Introduction This manual provides the information needed to operate and identify the parts of the AutoEverest and AutoPrism

Rimage AutoPrinter™ User Guide 2 110656_L Important Information This section provides support contact information, safety and compliance information

Important Information 110656_L 3 Safety and Compliance Information 20BSafety Precautions This manual and the indications on the product allow proper

Rimage AutoPrinter™ User Guide 4 110656_L 21BCompliance Information Product Name AutoPrinter II AutoPrinter III Model RAS10 RAS25 Notice for USA

Important Information 110656_L 5 9BRimage AutoPrinter Specifications . Notes: • The most up-to-date technical specifications for the AutoPrinter a

Rimage AutoPrinter™ User Guide 6 110656_L AutoEverest AutoPrism Physical size 22.5 in (57.2 cm) 22.5 in (57.2 cm) Height Width 15 in (38.1 cm) 1