Rimage AutoPrism Manual do Utilizador descarregar pdf (Página 9)

Align Perfect Print

Check Alignment

1. Stop Production Server if it is running.

2. Navigate: Start > Programs > Rimage > Utilities > Gemini Utilities. Gemini Transporter Utilities opens.

3. If you have the Rimage calibration disc (PN 202574-001), place the disc in bin 1.

 Note: If you do not have the calibration disc, refer to the Create a Calibration Disc procedure on

page 10.

4. In the Gemini Transporter Utilities window, select Calibrate Rotator. The Rotational Calibration

window opens.

5. In the Rotational Calibration window, select Test. The printer prints the alignment marks on the

reference grids and the centering marks near the center of the calibration disc. Refer to the image on

page 8.

Read the Grid Increments

• The center line on each of the rotational grids

is 32. Each line on the rotational grids has a

value of 8 (for a total of 64).

• The center line on the top margin grid is 75.

Each line on the top margin grid has a value

of 25 (for a total of 150).

• The center line on the left margin grid is 5.

Each line on the left margin grid has a value

of 1 (for a total of 10).

Calibration Disc (Without Alignment Marks)

1. Examine the rotational grids and the alignment marks to determine the level of adjustment needed.

Refer to the images on the following pages.

2. Adjust the alignment as necessary.

• If the left margin alignment mark does not print at the center line (5) and the and top margin

alignment mark does not print at the center (75), refer to the Centering Adjustment procedure on

page 8.

• If the rotational alignment marks do not print at the center line (32) on each side, refer to the

Rotational Adjustment procedure on page 9.

 Tip: If you must make both adjustments, for best results, complete the centering adjustment

procedure before you complete the rotational adjustment.

110873_C 7

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Rimage AutoPrism Manual do Utilizador Página 9